增強改性PPO
欄目：改性工程塑料 發布時間：2021-05-29 10:55
優良的力學和化學平衡性、抗沖擊性好、表面光澤度好、無鹵阻燃。...
 改性PPO Modified PPO 產品應用：電子類產品殼體、復雜結構件等注塑成型件 改性特征：無鹵阻燃 產品特征：優良的力學和化學平衡性、 抗沖擊性好、表面光澤度好、無鹵阻燃 |
||||
|
Applications: Shell of electronic parts, complex structure parts injection molding products Modified Features: Halogen-free Flame Retardant Product Features: Excellent mechanical and chemical balance, good impact resistance, good surface gloss, halogen-free flame retardant |
||||
| 測試項目與標準 Test Items & Standards |
無鹵阻燃型號 Halogen-free Flame Retardant |
|||
| 項目Items |
測試標準 Standard |
測試條件 Test Condition |
國際單位 S.I. Units |
6515HP-NHV0 |
| 機械性能 Mechanical | ||||
|
拉伸強度 Tensile Strength |
ASTM D638 | 50mm/min | MPa | 57 |
|
伸長率 Elongation |
ASTM D638 | 50mm/min | % | 40 |
|
彎曲強度 Flexural Strength |
ASTM D790 | 2mm/min | MPa | 85 |
|
彎曲模量 Flexural Modulus |
ASTM D790 | 2mm/min | MPa | 2000 |
| 懸臂梁缺口沖擊強度 | ASTM D256 | 3.2mm,23℃ | J/m | 350 |
|
Impact Strength, Izod notched |
||||
| 熱性能 Thermal | ||||
|
熱變形溫度 Heat Distortion Temp |
ASTM D648 | 1.8MPa,6.4mm | ℃ | 110 |
| 電性能 Electrical | ||||
|
體積電阻率 Volume Resistivity |
ASTM D257 | - | Ω.cm | 1016 |
| 其他 Others | ||||
|
玻纖含量 Glass Fiber |
-- | -- | % | - |
|
比重 Specific Gravity |
ASTM D792 | 23℃ | g/cm3 | 1.1 |
|
收縮率 Mold Shrinkage |
ASTM D955 | 23℃ | % | 0.4/0.6 |
|
吸水率 Weather Resistant |
ASTM D570 | 23℃，24h | % | 0.1 |
|
阻燃性 Flammability |
UL94 | 1.6mm | class | V0 |
| 3.2mm | V0 | |||
|
建議加工工藝 Suggesting processing technology |
||||
|
熔體溫度 Melt Temp |
℃ | 240-270℃ | ||
|
料筒溫度 Barrel Zone Temp |
℃ | 250-300 | ||
|
模具溫度 Mold Temp |
℃ | 50-60℃ | ||
|
預干燥 Pre-Dry Requirements |
90-100℃， 2hr |
|||
|
注：以上數值是根據實驗室標準測定的代表數值， 僅供客戶參考，不作為質保承諾。 |
||||
|
Note: The above data is based on standard laboratory condition, for reference only, not for product warranty. |
||||
